A great company for all automotive
performance for over 40 years

1 Items In cart

Total. $991.64

DINAN HIGH PERFORMANCE HEAT EXCHANGER – 2015-2020 BMW M2/M3/M4

DINAN HIGH PERFORMANCE HEAT EXCHANGER – 2015-2020 BMW M2/M3/M4

F80/F82/F83/F87

Part number (SKU): D780-0001A

Brand: Holley Holley

Share on Social Media

Original Price: $649.95

Quantity:

Heat is the enemy of performance. Keep temps down and performance will go up as a result of increased efficiency. It’s really as simple as that. In stock trim, testing made it painfully obvious that cooling was going to hold an even more vital role on the F8x (S55) platform to achieve maximum results.

The stock cooling system heat soaks after only 3 pulls and allows the engine air intake temperatures (IAT) to rise dangerously. The ECU must then reduce engine power to prevent detonation. With the Dinan high-performance heat exchanger the vehicle does not heat soak even after 7 pulls; more than twice the effectiveness of a stock setup!

Further testing focused on the heat exchanger produced the optimized design you see before you. With 60% more volume and 19% more face area than stock along with being a whopping 40mm thick (stock is 24mm), it becomes quickly apparent how heat soak is averted with the improved setup. While the unit could be physically thicker the 40mm dimension was ultimately chosen with consideration of airflow requirements of the main radiator which is located directly behind the heat exchanger. A thicker core would diminish airflow and sacrifice normal engine cooling which would be potentially detrimental to the long term health of the engine. The increased physical stature of the heat exchanger allows a reduction in water temperatures to the intercooler an average of 9° across the RPM range. The colder water entering the intercooler then improves is efficiency and allows the intake air to be cooled by an additional 6° average across the RPM range compared to the stock unit. The reduction in intake air results in an impressive 10 HP and 20 ft-lb of torque gain without any changes in the engine tune. The cooling unlocks some significant additional power when paired with the stage 3 DINANTRONICS Performance Tuner (where applicable).

  • More Power: Consistent +10 HP / +20 LB-FT of torque on the stock engine tune
  • 60% more core volume & 19% more face area than stock
  • 40mm thick Dinan cooler vs. 24mm thick stock cooler
  • 9° average water termperature reduction to the intercooler across the RPM range. Colder water improves intercooler efficiency and allows the intake air to be cooled by an additional 6° average across the RPM range compared to stock
  • Significant reduction in tendency to heat soak
  • Rubber mounted for vibration isolation
  • Track tested to ensure consistent performance under extreme conditions
Brand Dinan
Dinan Point Value 2
Emission Code 5
Height 9
Labor Time (Hours) 3.5
Length 29
Max HP Gain 10
Max Torque (lb-ft) Gain 20
Product Type Heat Exchanger
Weight 14
Width 17

Leave a Reply

Your email address will not be published.