A great company for all automotive
performance for over 40 years

1 Items In cart

Total. $991.64

AFR 315cc BBF Bullitt 14 Degree Cylinder Heads 3838

AFR 315cc BBF Bullitt 14 Degree Cylinder Heads 3838

AFR 315cc BBF Bullitt 14 Degree Cylinder Heads 3838

Share on Social Media

Original Price: $3,064.00

Quantity:

The 315cc heads are AFR’s largest and best flowing BBF heads! They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings, and high quality components throughout with .250 raised exhaust port locations. These heads are best suited for large displacement high RPM Big Block Ford racing engines or radical “Pro Street” style builds. Please note, due to AFR’s valve angle and location, custom pistons or notching existing pistons will be required

315cc Street Head Flow Chart
  .200 .300 .400 .500 .600 .650 .700 .750
Int 162 244 305 355 394 405 414 419
Exh 124 166 212 248 267 272 276 276

Test conducted at 28″ of water (pressure) on Superflow 600
Bore Size: 4.380″, 3/4″ radius plate exhaust, 2 1/8″ curved pipe

CYLINDER HEAD DETAILS:

100% CNC Ported Combustion Chambers

100% CNC Ported Intake Runners

100% CNC Ported Exhaust Ports

Competition 5-Angle Valve Job

11/32″ Bead Lock Intake Valve 2.300″ x 5.250″

11/32″ Bead Lock Tulip Exhaust Valve 1.760″ x 5.050″

PAC Racing #1224 Solid Roller Valve Spring .850″ max.

10° Manley Steel Retainers

10° 11/32″ Bead lock Keepers w/lash cap recess

ARP 7/16″ Rocker Studs

Adjustable 3/8″ Guide Plates

Viton Valve Seals

Bronze Valve Guides

BASIC DIMENSIONS & DATA: 

Material: A356 Aluminum

Intake Port Volume: 315cc

Intake Port Dimension: 2.275″ x 1.850″ x .575″R

Intake Port Location: Stock

Exhaust Port Volume: 142cc

Exhaust Port Dimension: 1.850″ x 1.600″

Exhaust Port Location: .250″ Raised

Combustion Chamber Size: 85cc

Valve Angle: 14° Intake/8° Exhaust

Valve Cant: 4.04° Intake/4.12° Exhaust

Valve Spring Pocket Diameter: 1.750″ O.D

Max Valve Spring Pocket Machining: 1.750″ O.D

Deck Thickness: .750″

Minimum Bore Diameter: 4.360″

Minimum Cross Sectional Area: 3.440 sq. in.

NOTE: Due to AFR’s revised valve location and angle, application specific AFR pistons or fly cutting your current pistons will be required.

 

    • General Recommendations for AFR Cylinder Heads:

      • Bar Codes – Please keep the bar code & paperwork shipped with your head, these contain all the specs for your heads when calling AFR.
      • High Volume/Pressure Oil Pumps – If you are using a high volume or high pressure oil pump it can submerge the valve seals in oil causing smoking or oil consumption. Your block manufacturer or engine builder can recommend oil restrictions to the top end/valve train components.
      • Pushrods – Different length pushrods might be required, always check pushrod length. Check pushrod clearance with heads placed on the block before final assembly. Larger pushrods will not fit without clearancing and is not recommended since some areas are very thin. AFR recommends the use of .120″ thick-wall pushrods.
      • Mills – Flat or angle mills could affect flow numbers and might require a thicker intake gasket.
      • Stud Girdles – Due to many available factory OEM and aftermarket style/variations your existing stud girdle may not fit (AFR heads require AFR Stud Girdles)
      • Boosted/Nitrous Applications – We strongly recommend considering Inconel exhaust valves and AFR’s optional heavy duty intake valve for power adder applications. Since boosted or nitrous oxide applications accelerate RPM quickly, additional spring pressure is required. We strongly recommend upgrading your valve springs or increasing your valve spring pressures since boost pressure on the valve reduces spring tension. For example, 15lbs boost on a 2.125 OD valve reduces the springs closed seat pressure by approximately 40-45lbs.
      • All MARINE Applications – We strongly recommend Inconel exhaust valves & also offer a hard anodized coating to slow the effects of corrosion. Please see note on guide clearance below.
      • Valve Guide Clearance – Your AFR Heads come with proper guide clearance (.0012″-.0016″) for most applications. Boosted/Nitrous or marine applications might require additional clearance and it is the customer’s responsibility to verify proper clearance in these applications.
      • Valve Springs – Forced induction, nitrous oxide and cams with aggressive ramp rates may require additional spring pressure. We offer optional valve springs for these types of applications. AFR also recommends the use of billet cam cores and short travel Hydraulic Roller lifters which tolerate higher spring loads. Please don’t hesitate to contact us directly if you question which spring is correct for your application.
      • AFR Titanium Valves – Might require lash caps and different length pushrods. Titanium valves are coated, do not grind valves because it removes the protective coating.
      • Piston to Valve – AFR assumes no responsibility for damage if the end user builds an engine without properly verifying he has enough piston to valve clearance (depth and radial clearance both checked). We recommend a minimum depth of .080″ on the intake valve and .100″ on the exhaust with a radial clearance of .020″ minimum around the perimeter of each valve. Clay is recommended to visually verify both depth as well as radial clearance. Just checking depth is not enough, the position of the valve pocket must also be addressed. It is the customers responsibility to verify proper piston to valve clearance.
      • CNC Porting – Occasionally a 100% CNC ported head might have a very small area left “as cast”, this in no way affects performance.
      • Shaft Mount Rockers – Shaft mount rockers might require additional clearance for proper pushrod fitment. Do not clearance the push rod area as the wall is .060″ thick. If you use Jesel Shaft Mounts, AFR only recommends their Pro Series.
      • Comp Cams Pro Magnum Rockers – Typically these rocker arms do not clear a 1.500″ O.D retainer. A lash cap is required to space up the rocker arm.
      • Spring Installation – To ease installation with 1.550″ O.D or larger springs, 12 pt head bolt or studs are recommended for extra clearance. Beveled or ground washers might be needed (ARP #200-8504 comes with smaller O.D and doesn’t need to be ground)
      • Valve Spring Installed Heights – AFR valve spring installed height spec is +/- .015 which is the smallest shim available for adjustment.
      • Rocker Arms – Use full roller rocker arms, roller tip rockers with stock style bodies are NOT recommended.
      • Please note, due to AFR’s valve angle and location, custom pistons or notching existing pistons will be required

Leave a Reply

Your email address will not be published.