A great company for all automotive
performance for over 40 years

0

Total. $0.00

Pro-Flo 4 EFI Traditional 4150-Style Kit #35670 For Chrysler HEMI Gen II 426-572

Pro-Flo 4 EFI Traditional 4150-Style Kit #35670 For Chrysler HEMI Gen II 426-572

Pro-Flo 4 EFI Traditional 4150-Style Kit #35670 For Chrysler HEMI Gen II 426-572

Share on Social Media

Original Price: $2,696.00


Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap design manifold with dual square-bore 4150-style throttle bodies that bolts directly onto vehicles with a shaker hood. The Dual-Quad HEMI EFI manifold is compatible with factory-style cylinder heads but optimized for use with Victor Jr. HEMI heads. Manifold comes preassembled and ready to run with throttle bodies, 60 lb/hr injectors and fuel rails. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential-port injection and infinite control over ignition and fuel events under all conditions. This system is rated for 825 horsepower at 43 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet included for a streamlined installation. Key advancements of Pro-Flo 4 EFI are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app that comes preinstalled on the tablet. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI does not require laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration to get the maximum performance out of your engine by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.

When choosing to upgrade your engine to modern fuel injection, look no further than Edelbrock’s Pro-Flo 4 EFI systems. Edelbrock has been delivering the best combination of dyno proven electronic fuel injection performance for over 40 years. Pro-Flo 4 is not just a replacement for your carburetor, it’s a complete engineered system that provides the ultimate in performance, drivability and quality. These easy to use, self-learning EFI systems feature an all new ECU pre-loaded with 80 dyno-tuned calibrations that support popular engine configurations up to 825 hp. Combined with the enhanced E-Tuner 4 App’s easy to use setup wizard; you get plug and play performance without the need of a laptop or costly dyno tuning sessions. Pro-Flo 4 EFI systems are the most complete systems available on the market, giving you what you need to upgrade to powerful and efficient fuel injection for your vehicle. Pro-Flo 4 EFI systems are the best value for your dollar!  #35760/#35770 manifold height: 4.58. #35780 Manifold height: 4.58. #35700/#35710 manifold height: 4.95. #35740/#35750 manifold height: 7.40. #35830/#35840 manifold height: 5.90. #35850/#35860 manifold height: 5.90. #359300 manifold height: 6.30. #335910 manifold height: 6.10. #35930/#35940 manifold height: 6.35. #35950 manifold height: 6.25. #35960 manifold height: 6.49. #35970/#35980 manifold height: 6.60. Throttle body height: 2.25

INSTALLATION NOTE: These systems will require a high pressure EFI compatible fuel delivery system. Fuel delivery kits are available and sold separately

Leave a Reply

Your email address will not be published.