MSD DIGITAL 6M-3L MARINE IGNITION
Marine certified, digital capacitive discharge ignition with built-in rev limiter and start retard.
Part number (SKU): 6564
Brand:
MSD
Share on Social Media
Original Price: $407.95
We’ve raised the bar and added an all-new UL listed marine ignition box to our lineup. The 6M-3L is a fully sealed unit with a single wiring connector makeing installation neat and easy.
Three rotary dials and an LED display simplfy setting the cylinder select, start retard and rev limiter. Plug-in rev limiter chips and hard to read dials are a thing of the past. For diagnostic purposes, the LED display can also be set to a live tach mode on V8’s and even display battery voltage with the turn of a knob.
The 6M-3L is a capacitive discharge ignition that multi-sparks from idle to 3,000 RPM providing a clean idle and quick throttle response. Above 3,000, capacitive discharge sparks will run clean through 12,000 RPM . Boasting more features and higher spark energy than its predecessor, the 6M-3L is the performance upgrade your boat needs!
- Large, easy to read LED display
- Shift interrupt feature eases shifting
- MSD’s smoothest rev limiter yet, protecting parts and saving your engine
- Records highest RPM the engine turned for last 20 minutes of run time
- Easy setup of features with three rotary dials on the face of the unit
- Built-in Start Retard adjustable in 0⁰, 10⁰ or 20⁰ increments for quick, easy starts and extend starter life
- LED display shows rev limit, highest RMP turned, cylinder select, start retard, battery voltage and can be set to tach mode
- Full delivery of spark energy and easy starting down to 6 volts battery supply
- Highly efficient, low current draw for extended battery life
- Fully potted housing to withstand demanding marine conditions
- Sealed connector for clean wiring and trouble-free operation
- Works on 4, 6 and 8 cylinder engines
- Reverse polarity and overheat protection provide ultimate reliability
- Can be triggered by magnetic pickup, amplifier, and points inputs
| Brand | MSD |
|---|---|
| Current Draw | 0.8 Amps per 1,000 RPM |
| Emission Code | 3 |
| Features | Start Retard |
| Primary Voltage | 535V w/ Blaster Coil / 550V w/ HVC Coil PN 8250 |
| Product Type | Ignition |
| RPM Range | 12,000 RPM |
| Secondary Voltage | 45,000 Volts |
| Spark Energy | 135mJ w/ Blaster Coil / 150mJ w/ HVC Coil PN 8250 |
| Spark Series Duration | 20° Crankshaft Rotation |
| Voltage Required | 6 to 18 Volts |
| Weight and Size | 2.5 lbs., 7.89″L x 4.00″W x 1.87″H |
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
The following vehicles are considered Racing Use Only Vehicles:
- Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle
Leave a Reply